Sublimation Coating Chemical Powder for Inkjet Printing

Sublimation Coating Chemical Powder for Inkjet Printing

Sticky Sublimation Coating Powder
Sticky sublimation coating powEPTis specifically created and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for the elastic cloth transfer printing, to avert the overlap of the sample, deformation and other concerns of elastic cloth in the procedure of transfer, ensuing in a quite low move rate of transfer printing.
1 For the duration of the transferring, the sticky coating powEPTcould be ready to adhere the material and paper, but there is no glue residue on the fabric following stripping
two The stickiness of the fabric and paper can be adjusted by the company of the transfer paper unEPTthe guidance of our company and the viscosity is far more steady, which can be saved for a EPT time.

Higher Concentration Sublimation Coating Powder
For the existing higher-pace coating EPTs, our firm independently deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s a strong material of more than thirty% of the coating chemical – high focus coating powder. On the basis of no escalating in expenses, the coating pace could be substantially improved, and production capability will be doubled than the quickly-dry coating powders.

For higher-velocity coating EPT manufacturing, coating maker need to have a mature coating technologies.

Quickly-dry Sublimation Coating Powder
The formulation of the first generation of EPT sublimation transfer paper coating is broadly employed in the market place, but progressively it can not be matched with the requirement of higher-pace printer because of to the high cost, minimal creation effectiveness and slow drying of printing coating.
Nano-induced secondary self-assembly tactics of this coating content, are tremendously improved in the adhering to factors:

one The general price of this rapidly-dry combined powEPTis diminished whilst the usability of the powEPTremains unchanged

2 This fast-day coating powEPTcan enhance the efficiency of coating creation, and the manufacturing pace can be promoted by a lot more than twenty five%.

three Because of to purposeful advancement, the printing drying charge of this merchandise has been enhanced much more than one time, and it can savelarge sum of electrical EPT from the baking lamp.

How to use our coating powEPT:

  1. Including proportional water into stirring tank, maintain h2o temperature as same as room temperature.
  2. Place EPT bag coating powEPTslowly into agitator even though stirring, and hold stirring till the chemical powEPTdissolving uniformly into h2o, no lump on the floor of liquid. The dissolution time is dependent on the approach of agitator.
  3. EPTking some samples of undertaking exams following dissolving, and just take notes of glue temperature and corresponding viscosity, ensure the competent tests result just before filtration.
  4. Two instances of filtration just before coating on EPT with 800-100mesh filter
  5. The liquid glue continue being on EPT is recyclable even though coating. It should be through filter screen again and can be used in miXiHu (West Lake) with new liquid coating chemicals.

JoinGoal EPT Material(HangZhou) Co., LTD

TEL :86~13 0571 88828 138581177787 62890542
Site: part

Sublimation Coating Chemical Powder for Inkjet Printing

Sublimation Coating Chemical Powder for Inkjet Printing