China Factory Binder for Fireproof Door

China Factory Binder for Fireproof Door

Adhesive is vital assistant material of anti-theft doorway, steel wooden doors, polymer doorways, which refers to get in touch with with air curing one ingredient adhesive. With the attributes of high bonding toughness, excellent weathering resistance, easy to use, h2o resistance and so on, it is broadly used in iron and metal, galvanized steel plate, wooden construction and and so on.

Software Desc.:

Honeycomb paper (incXiHu (West Lake) Dis.Hu (West Lake) Dis. aluminum honeycomb paper, polymer honeycomb paper, and many others.) EPT foam glue. Employed in require filling device bonding honeycomb paper and other paper goods.

Used for bonding fireproof board, honeycomb paper in products such as protection doorways, and so on..

Bonding polystyrene foam board for use in devices such as protection doorways, and many others.


one. Sturdy adhesion, shear, higher peel energy, substantial and lower temperature resistance, hydrolysis resistance , warmth resistance and growing older resistance.

two. It can attain optimum physical performance following curing at place temperature and no degumming phenomenon in the method of transfer printing of protection door.

three. The operational time adjustment is powerful, it can be selected according to the diverse time and diverse curing procedure of Styrofoam.

4. Lower toXiHu (West Lake) Dis.metropolis solvent, without using very toXiHu (West Lake) Dis.c solvent to reduce costs.

Technological Index:

Viscosity(with 4 cups, 77 ordmF):a hundred-300s

Efficient material contentL78+-three%


1)Brushing procedure: the surface area of the functioning object is pretreatment #8594brushing glue #8594agglutination #8594curing. Cleansing the adhesive floor of protection doorway to guarantee that no rust and no oil. It will influence the adhesion of Styrofoam if this element not be good handled.

two)In orEPTto guarantee the toughness of the adhesive, spot the adhesive evenly coated scratch in the sticky area. It really is far better to scrape with plastic toothed blade scraper, it can not use hairbrush brush glue due to the fact of substantial viscosity. The dosage of glue can be verified by the embossed depth of door. Brushing need to not be way too thick, exposed time not as well EPT.

3)Shell out consideration to pace the procedure of gluing, coating evenly. It demand fast pace in summer, not brush again and forth a lot of times. If the motion is slow, you can put force in the glue EPT, never wait for the surface area glue has dried and then set stress on. Agglutination can be handled by chilly pier or hot pier, the least time of chilly pier is three-4 hrs and the least time of scorching pier is 15-30 minutes. The cement time more than ten hours, it really is better that the backing temperature is a hundred ninety ~ 220C deg.

four)Remember to seal use lid for the unused glue to avoid curing crust. The thoroughly clean of resources can use ethyl acetate solvent, or it can be soaked in heat drinking water for a number of minutes, and then clean with soap. This product should be saved in a dry, ventilated, sealed setting, you should do not touch the drinking water.


In the two procedure of brushing glue and strain on glue, it need to be concluded in the surface area drying time that typically much less than twenty minutes .

EPT amp Shipping:

EPT Information 200kg/drum, eighty drums for a 20” container.
Shipping Time 15 daEPTafter get

About us:
HangZhou XiHu (West Lake) (West Lake) Dis. Chemical Co., Ltd. is a single of the most significant adhesive companies in China, EPTizes in the study, manufacture and advertising of diverse varieties of adhesives, incEPTd: Drinking water-Dependent Homo-Polyvinyl Acetate Emulsion Adhesive, Polyurethane adhesive, spray adhesive, get in touch with adhesive, footwear adhesive, wallpaper glue, and so on. OEM is offered listed here.

China Factory Binder for Fireproof Door

China Factory Binder for Fireproof Door