Economical Sublimation Coating Powder for Fabric Printing

Economical Sublimation Coating Powder for Fabric Printing

Sticky Sublimation Coating Powder
Sticky sublimation coating powEPTis especially made and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for the elastic material transfer printing, to stop the overlap of the sample, deformation and other troubles of elastic cloth in the process of transfer, ensuing in a very low pass rate of transfer printing.
one Throughout the transferring, the sticky coating powEPTcould be capable to adhere the cloth and paper, but there is no glue residue on the cloth after stripping
2 The stickiness of the material and paper can be altered by the company of the transfer paper unEPTthe suggestions of our company and the viscosity is more stable, which can be saved for a EPT time.

Higher Focus Sublimation Coating Powder
For the existing higher-velocity coating EPTs, our company independently deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s a sound material of far more than thirty% of the coating chemical – higher focus coating powder. On the foundation of no rising in expenses, the coating pace could be drastically improved, and production potential will be doubled than the rapidly-dry coating powders.

For higher-velocity coating EPT generation, coating producer must have a experienced coating technological innovation.

Rapidly-dry Sublimation Coating Powder
The formulation of the initial era of EPT sublimation transfer paper coating is widely used in the industry, but gradually it can’t be matched with the need of substantial-pace printer due to the substantial value, lower production effectiveness and sluggish drying of printing coating.
Nano-induced secondary self-assembly techniques of this coating content, are greatly enhanced in the adhering to facets:

1 The overall expense of this quick-dry blended powEPTis lowered while the usability of the powEPTremains unchanged

2 This rapidly-day coating powEPTcan increase the efficiency of coating creation, and the generation velocity can be promoted by a lot more than 25%.

three Owing to useful enhancement, the printing drying price of this product has been enhanced far more than a single time, and it can savelarge volume of electric powered EPT from the baking lamp.

How to use our coating powEPT:

  1. Incorporating proportional water into stirring tank, hold h2o temperature as very same as space temperature.
  2. Put EPT bag coating powEPTslowly into agitator whilst stirring, and hold stirring until finally the chemical powEPTdissolving uniformly into drinking water, no lump on the area of liquid. The dissolution time depends on the approach of agitator.
  3. EPTking some samples of undertaking assessments right after dissolving, and consider notes of glue temperature and corresponding viscosity, guarantee the qualified screening end result just before filtration.
  4. Two instances of filtration prior to coating on EPT with 800-100mesh filter
  5. The liquid glue continue being on EPT is recyclable although coating. It should be by way of filter display once again and can be utilised in miXiHu (West Lake) with refreshing liquid coating chemical compounds.

JoinGoal EPT Substance(HangZhou) Co., LTD

TEL :86~13 0571 88828 138581177787 62890542
FAX: 86~571-8822571/8822 0571 -67913566
Site: part

Economical Sublimation Coating Powder for Fabric Printing

Economical Sublimation Coating Powder for Fabric Printing