Sticky Sublimation Coating Powder

Sticky sublimation coating powEPTis exclusively designed and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for the elastic material transfer printing, to prevent the overlap of the pattern, deformation and other issues of elastic cloth in the method of transfer, resulting in a quite minimal move rate of transfer printing
Attribute:
one.During the transferring , the sticky coating powEPTcould be ready to stick the material and paper, but there is no glue residue on the fabric soon after stripping
two.The stickiness of the cloth and paper can be altered by the company of the transfer paper unEPTthe advice of our organization and the viscosity is more stable, which can be stored for a EPT time.

Higher Focus Sublimation Coating Powder

For the present large-speed coating EPTs, our organization independently deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s a reliable content material of more than thirty% of the coating chemical-high focus coating powder. On the basis of no increasing in charges, the coating velocity could be signnificantly enhanced, and manufacturing capacity will be doubled than the quick-dry coating powders.
Characteristic:

For large-velocity coating EPT manufacturing, coating producer need to have a mature coating technologies.

Fast-dry Sublimation Coating Powder

The formulation of the first generation of EPT sublimation transfer paper coating is broadly employed in the market place, but gradually it cann’t be matched with the requirement of higher-speed printer because of to the higher value, reduced production efficiency and slow drying of printing coating.
Characteristic:
Nano-induced secondary self-assembly methods of this coating content , are tremendously enhanced in the adhering to factors:

one.The general value of this fast-dry combined powEPTis decreased even though the usability of the powEPTremains unchanged

two.This quickly-dry coating powEPTcan enhance the efficiency of coating creation, and the manufacturing speed can be promoted by far more than 25%

3.Due to purposeful enhancement, the printing drying rate of this product has been improved much more than one particular time, and it can preserve big amount of electric powered powEPTfrom the baking lamp.

How to use our coating powder:

one.Adding proportional water into stirring tank, hold drinking water temperature as exact same as room temperature.
two.Place EPT bag coating powEPTslowly into agitator while stirring, and hold stirring until finally the chemical powEPTdissolving uniformly into drinking water, no lump on the floor of liquid. The dissolution time relies upon on the technique of agitator.
three.EPTking some samples of doing checks after dissolving, and just take notes of glue temperature and corresponding viscosity, ensure the certified screening consequence prior to filtration.
four.Two moments of filtration before coating on EPT with 800-100mesh filter
5.The liquid glue remain on EPT is recyclable although coating. It must be via filter screen again and can be utilized in miXiHu (West Lake) Dis.ng with new liquid coating chemical substances.

Million-ton EPT Material(HangZhou) Co., LTD
Cindy

Web site: